DCC BUS Termination/Snubber filters – No solder


87 in stock

SKU: PCB1004 Category:


2 x DCC bus termination kits which are also known as a DCC snubbers.

Each termination filter kit includes two PCB Boards that can be wired across  across the ends of the bus wires to suppress voltage spikes and assist maintenance of good DCC signal. Each PCB boards has a screw block connectors to allow fitting to both ends of your DCC bus wiring without the needs of any soldering

These low cost terminator devices can also extend decoder life and improve overall reliability of your layout.

Installation instructions are supplied.

THESE TERMINATION FILTER KITS ARE NOT POLARITY SENSITIVE, but are marked up the R for the Red cable and B for the Black cable, if they are swapped for any reason, it makes no difference.


There are no reviews yet.

Be the first to review “DCC BUS Termination/Snubber filters – No solder”

Your email address will not be published.