MTB MP1 Basic motor converter

Description

• Miniature dimensions 28×40 mm (w×d)
• Direct replacement of electromagnetic shifters with three-wire connection
• Easy adjustment of the basic position of the rod

The stroke is adjusted in three stages of 3, 6 and 9 mm, by the position of the pin in the carrier. The sliding mechanism ensures a smooth approach to the end position and its arrest.

The mechanism is equipped with position limit switches, i.e. the control power supply can be connected permanently, after reaching the appropriate position, the current consumption and movement are automatically disconnected. For auxiliary purposes, it is equipped with a 1A switching contact, with 0.5A thermal fuse protection (short-circuit protection on the crossover heart).

Download the Manual here

Motorized converters for model railways

• Motorized adjusters with quiet and slow operation
• Miniature dimensions
• Built-in motor with planetary gear
• Universal connection as an electromagnetic or motorized adjuster
• Possibility of setting degrees of lift
• Integrated switching contacts
• Convenient installation
• Easy adjustment of the basic position of the rod

Adjusters are used for the electrical control of two-position mechanisms in models, typically switches or mechanical signals and barriers.
The stroke is adjusted in several steps by the position of the pin in the carrier. The sliding mechanism ensures a smooth approach to the end position and its arrest.

The power supply is direct current and alternating current in the range of 9–16 V, consumption approx. 150 mA during operation. The mechanism is equipped with position limit switches
, i.e. the control power supply can be permanently connected, after reaching the appropriate position, the current draw and movement are automatically disconnected.