Description
• Replacement for MP5
• Miniature dimensions
• Universal connection as an electromagnetic or motorized shifter
• 4 stages of stroke 3, 6, 9 and 12 mm
• Integrated double changeover contact
• Convenient installation with removable connector
The stroke is set in four stages 3, 6, 9 and 12 mm, pin position in the carrier. The sliding mechanism ensures a smooth approach to the end position and its arrest.
The connection of the MP5 changer is universal – three-wire (as electromagnets) or two-wire (motorized changers), so the original types can be easily replaced without changing the electrical installation of the track. Compatible with common DCC decoders, e.g. Lenz LS100, LS150 and decoders for motor converters. For additional use, the converter is equipped with two switching contacts with a capacity of 1A. The limit switches ensure reaching the position even after the power supply has been restored.
Motorized converters for model railways
• Motorized adjusters with quiet and slow operation
• Miniature dimensions
• Built-in motor with planetary gear
• Universal connection as an electromagnetic or motorized adjuster
• Possibility of setting degrees of lift
• Integrated switching contacts
• Convenient installation
• Easy adjustment of the basic position of the rod
Adjusters are used for the electrical control of two-position mechanisms in models, typically switches or mechanical signals and barriers.
The stroke is adjusted in several steps by the position of the pin in the carrier. The sliding mechanism ensures a smooth approach to the end position and its arrest.
The power supply is direct current and alternating current in the range of 9–16 V, consumption approx. 150 mA during operation. The mechanism is equipped with position limit switches
, i.e. the control power supply can be permanently connected, after reaching the appropriate position, the current draw and movement are automatically disconnected.
Reviews
There are no reviews yet.